The fixture is ideal for supporting plantations in a greenhouse, farming table or tents. The LED utilizes Vero29 Generation 7 COB LEDs that consume 300-watts power to emit full-spectrum white light. The PPF of the system is reported at 675 μmol/s, and the PPFD has been found out to be 912 μmol/m²/s.
Fully-Assembled: Mount the fixture immediately after you receive it as the system comes fully-assembled.
Dimmable: Adjust the light intensity of the system with the dimmable driver(pre-wired potentiometer) that you get along with the system. The adjustable range is 10-100%.
Highly-Efficient: The system withdraws 300 watts power to deliver high PPF, i.e. 675 μmol/s.
Heatsink: The green pinned heatsink allows quick dissipation of the excessive LED heat, allowing it to function smoothly.
The timber grow light uses smart COB LEDs that offer tremendous thermal resistance, give better lighting effect and deliver high light efficiency.
You must hang the fixture at 18 inches height to provide even light coverage to 8 square feet area. The system withdraws 300-watts power to provide sufficient lighting to plantations in small growing spaces. The system is capable of being placed closer to the canopy. It would allow an even PAR spread.
The PPF and the PPFD output of the fixture are 675 μmol/s and 912 μmol/m²/s respectively so you can expect high-quality, healthier yields.
The grow system comes with a pre-wired potentiometer that allows dimming. You can take control of the light intensity settings with its help. The lights can be dimmed down to 10%, and the maximum range it can be turned to is 100%. So, with the dimming feature, you can reduce energy consumption and save massively on electricity bills.
The 3VL model utilizes COB LEDs that emit full-spectrum light that supports full-cycle flowering.
The green pinned component at the back of the fixture are heatsinks that do thermal management for the system. It does not let the COB LEDs get overheated and thus prevents its premature failure. Heatsink ensures a longer product life.
The grow light system comes fully-assembled, so you do not have to worry about reading lengthy instructions from the manual. The system is daisy chain capable which means that you can connect multiple units end to end to provide coverage to a wide area.
SKU/Model No.: LED-TGL-3VL
Coverage Area: 8 Square Feet at 18 inches above canopy
PPFD: 912 μmol/m²/s
Total Wattage: 300 W
PAR Wattage: 150 W
PPF: 675 μmol/s
Fixture Dimensions: 42 x 10 x 4 (in)
Weight: 15.2 (lb)
Power Cord Length: 10 Feet
Daisy Chain Capable: Yes
Manufacturers’ Warranty: 3-Years