The Yield Lab Complete 24w T5 Fluorescent Grow Light Kit (6400K) comes with everything you need to get your plants up and running indoors. Designed for simple setup and use, this T5 grow light kit will be able to grow your chili’s, peppers, clones, and seedlings without a problem.
T5 fluorescent bulbs may not draw a lot of energy, but these Yield Lab T5’s pack a punch. If you’ve got smaller plants, clones, or seedlings that need a strong source of light without overwhelming heat, T5’s are the way to go. That’s why you can’t pass a cloning room without seeing T5 grow lights: their 6400k light temperature sits in the “cool” spectrum of light, which is what vegging plants (like clones) can’t live without.
Unlike HID grow lights, these T5 lights only have 24w’s of power shining down on to your plants. That means these lights give your plants significantly less heat than MH bulbs, preventing heat damage/stress without sacrificing the wavelengths your plants need to grow.
And the best part is that these grow light kits are a breeze to set up:
- Remove the bars of the hanging rack, and loosen the screws just enough to see 3-4 threads on each screw
- Align one of the base bars with its leg bar, with the screws facing in
- Slip the connecting plate in to place around the screws, mount, and fasten the screws down
- Repeat the same with the other leg
- Align the hanging bar with one of the legs, slip the mounting corner-piece in to position between the two bars (the flat end facing forward), and repeat with the other leg on the opposite end
- Take one of the rope ratchet clips and attach it to the corresponding opening of the light reflector; repeat on the opposite end
- Raise the grow light with the center rope, then lock the light in to the height you want by sliding the black hook up to the mounting bar and pulling down gently on the locking tab
- Plug the reflector in to a 120v outlet, flip the “On” switch, and you’re growing in no time!
And these aren’t just great on their own, you can use them in your exiting grow setup, too. LED growers especially love these lights because they’ll fill in any gaps in coverage LED’s can handle. HID’s can benefit from these lights instead of using LED’s for supplementing light.
With the Yield Lab Complete 24w T5 Fluorescent Grow Light Kit (6400K) you’ll be saving money on energy without sacrificing the light spectrum your plants thrive off. Portable, simple to install, and even easier to install, grab these lights today and get all of those plants the light they need without all the heat.
- 1x Yield Lab 2ft. T5 Fluorescent Grow Light Reflector ( 2ft (L) x 5in. (W) x 2.5in (H) )
- 1x Yield Lab 2ft. T5 6400k (Grow) Fluorescent Grow Light Bulb ( 2ft (L) x 5/8in. (D) )
- 1x Yield Lab 2ft. T5 Hanging Rack w/ Rope Ratchet Hangers ( ~2.2ft (L) x 2ft. (H) )