Exclusive Limited Time Offer: GrowAce.com customers will receive a FREE pair of Yield Lab LED grow room glasses with the purchase of the Iluminar HYPERMOL 720W LED Grow Light ($29.95 value!)

Unleash full-cycle growth power with the iLuminar Hypermol 720W—a premium, plug‑and‑play full-spectrum LED fixture designed for serious growers. Delivering 1,944 µmol/s PPF at an impressive 2.7 µmol/J efficiency, this lightweight yet robust light offers balanced blue and red spectrum for tight vegetative growth and explosive flowering. With its fanless, passive-cooled aluminum design, 0–10 V dimming compatibility, and easy-unfold setup, it’s built to integrate seamlessly into any 4’×4’ grow space—all backed by a 5-year warranty and IP66-rated durability. Enlighten your canopy from day one and elevate crop yields with minimal effort.

• Remarkable Output & Efficiency – 1,944 µmol/s PPF at 2.7 µmol/J drives balanced, powerful plant growth

• Optimized Full-Spectrum – Rich blue reduces stretch in early stages, strong red enhances budding 

• Plug‑and‑Play Design – Unfold, hang, plug; no tools required, with 0–10 V dimming control 

• Durable, Silent Build – Passive cooling heatsink, uniform 4'×4' coverage, IP66-rated, and 50k‑hour LED lifespan

The iLuminar Hypermol 720W is a refined, high-output LED solution built for growers who want maximum results with minimal setup. With a solid 1,944 µmol/s Photosynthetic Photon Flux (PPF) and efficient 2.7 µmol/J rating, this fixture ensures your plants receive ample and balanced light for optimal growth—without excessive energy consumption 

Its full-spectrum design is carefully tuned to the plant lifecycle: robust blue wavelengths encourage compact, healthy vegetative growth, while a stronger red presence promotes bud density and flowering vigor. This spectrum optimization supports tighter internodal spacing and higher yield potential 

One of the Hypermol's standout features is its effortless setup. There's no assembly—just unfold the frame, secure it at an 8–12″ height above your canopy, plug it in, and activate. Compatibility with 0–10 V dimming allows integration with standard environmental controllers, giving you fine-grain light management for every growth phase  

Crafted from durable extruded aluminum with enhanced heat sinks, the Hypermol 720W operates silently, with passive cooling and a low-profile form. This design maintains LED longevity (over 50,000 hours at 90% output), and its IP66 rating ensures protection in humid or wet grow environments.

Built for standard 120–277 V input, drawing 6 A at 120 V, it emits approximately 2,462 BTU and spans a uniform 4’×4’ light footprint. Backed by ETL/DLC certifications and a 5-year warranty, Hypermol 720W delivers commercial-grade performance with residential simplicity. If you're looking for a powerful, dependable grow light that minimizes effort but maximizes results, this fixture is made for you.

Download Complete Spec Sheet here

Download Instruction Manual here

Specifications:

• Model: Hypermol 720W

• Power Draw: 720 watts

• PPF Output: 1,944 µmol/s

• Efficacy: 2.7 µmol/J

• Spectrum: Full-spectrum (rich in blue and red wavelengths)

• Input Voltage: 120–277V AC

• Current Draw:

  • 6.00A @ 120V

  • 3.46A @ 208V

  • 3.27A @ 220V

  • 3.00A @ 240V

  • 2.60A @ 277V

• Power Factor: >0.90

• Total Harmonic Distortion (THD): <20%

• BTU Output: Approximately 2,462 BTU/hr

• Cooling System: Passive-cooled (fanless, silent operation)

• Dimming: 0–10V compatible; dimmable from 0–100%

• Coverage Area: Ideal for 4' × 4' flowering canopy; up to 5' × 5' for veg

• Minimum Hanging Height: 6–8 inches above canopy

• Light Distribution Angle: 120°

• Operating Temperature Range: 0°C to 35°C (32°F to 95°F)

• Fixture Dimensions: 41.9″ L × 43.5″ W × 2.3″ H (1065mm × 1105mm × 58mm)

• Weight: 50.3 lbs (approx. 22.8 kg)

• IP Rating: IP66 (dust-tight and water-resistant)

• Certifications: ETL, CE, FCC, DLC listed

• LED Lifespan: >50,000 hours (at 90% output maintenance)

This commercial fixture requires a Iluminar iLogic Plus Controller to operate, which must be purchased separately. The fixture’s initial default is set to Null/Off. Ensure your Plus Controller is connected and properly configured before use to prevent issues.